prsente / presents:
n v f m switching capacity up to 25a. pc board mounting and insert mounting available. suitable for automation system and automobile auxiliary etc. ordering information nvfm c z 20 dc12v 1.5 b d 1 2 3 4 5 6 7 8 5 coil rated voltage(v) dc:6,12,24,48 6 coil power consumption 1.2:1.2w 1.5:1.5w 7 t erminals b: pcb type a: plug in type 8 coil transient suppression: d: with diode r: with resistance nil: standard contact data contact arrangement 1a spstno 1c spdt(b-m) contact materia agsno , agni 2 contact rating (resistive) 1a 35a,25a/14vdc 1c 20a/14vdc,no:30a/14vdc,nc:25a/14vdc max. switching power 350w max. switching voltage 75vdc max. switching current:35a contact resistance or voltage drop 50m item 3.12 of iec255-7 5 electrical 10 item 3.30 of iec255-7 7 mechanical 10 item 3.31 of iec255-7 caution: 1.the use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.pickup and release voltage are for test purposes only and are not to be used as design criteria. 006-1200 6 7.8 30 4.2 0.6 012-1200 12 15.6 120 8.4 1.2 024-1200 24 31.2 480 16.8 2.4 048-1200 48 62.4 1920 33.6 4.8 006-1500 6 7.8 24 4.2 0.6 012-1500 12 15.6 96 8.4 1.2 024-1500 24 31.2 384 16.8 2.4 048-1500 48 62.4 1536 33.6 4.8 dash numbers coil voltage vdc coil resistance 10% pick up voltage vdc(max) (70%of rated voltage ) release voltage vdc(min) (10% of rated voltage) coil power consumption w operate time ms release time ms rated max. coil parameter 10 7 1.2 1.5 10 7 features 1 part number nvfm 2 contact arrangement a:1a (1.2w) c:1c(1.5w) 3 enclosure s: sealed type z: dust cover 4 contact current 35:35a/14vdc 30:30a/14vdc 25:25a/14vdc 20:20a/14vdc 23 15.5 26 operation life qualification inspection: perform the qualification test as specified in the table of iec255-19-1 and minimum sample size 24. operation condition 1) insulation resistance 100m min (at 500vdc) item 7 of iec255-5 1) dielectric strength between contacts 50hz 500v item 6 of iec255-5 between contact and coil 50hz 1000v item 6 of iec255-5 2 shock resistance 100m/s 11ms 1 1msiec68-2-27 t est ea vibration resistance 10~40hz double amplitude 1.27mm iec68-2-6 t est fc terminals strength 8n 4n pc type iec68-2-21 t est ua1 solderability 235 2 3 0.5s iec68-2-20 t est t a method 1 ambient t emperature -40~125 relative humidity 85% (at 40 ) iec68-2-3 t est ca mass 18.5g note: 1). ,when testing, coil terminals , if coil transient suppression is installed in relay . should be connected dimensions notes 1).dimensions are in millimeters. 2).inch equivalents are given for general information only . reference data n v f m mm /inch note: t erminals as shown above are also available. wiring diagram (bottom view) dimensions plug in type pcb type mounting (bottom view) 3-2.6 1.2 1 . 0 2 4 m a x . 0.197 0 . 4 5 3 ( 0 . 3 7 4 ) 0.905max. 0.610max. 0.248 15.5max. 23max. 0.217 0.189 0.031 0 . 3 5 4 0.315 0.551 0.315 0.102 0.047 0 . 3 5 4 0.248 0.189 0.031 0.087 0.031 0.098 0 . 0 9 8 0 . 1 2 6 2 6 5.5 2.5 6.3 2.5 0 . 1 7 7 9 4 . 5 0 . 1 7 7 4 . 5 0 . 1 0 6 0 . 0 4 7 2 - 2 . 7 1 . 2 m a x . ningb o huaguan relay corporation ltd. nhg relays
|
